Ask a Question
FiltersClear
CMS-CATEGORY_REF
CANON (7)
Content Source
Articles (7)
Products
imageFORMULA ScanFront 300 CAC/PIV (7)
 
 
Search Results
CMS-XML Not enough memory to execute scanner settings
ScanFront uses memory to scan documents. This memory usage differs according to conditions such as document size and resolution. When setting scanning conditions that require a large amount of memory capacity, an error message saying "Not enough memory to execute current scanner settings" may appear and you may not be able to scan the document.
CMS-XML Replacing the Rollers and Document Holding Guide (SF-300 Series)
When the rollers start to wear out, document feed errors such as paper jams are more likely to occur.
CMS-XML Cannot connect to the network (device name conflict problem).
Contact the system administrator of the network and change the device name setting. When you install two or more ScanFront scanners, take care to ensure duplicate device names are not set.
CMS-XML To keep the [Confirm address before sending] window from appearing, make sure it has been set to [OFF].
[Confirm addresses before sending] has been set to [OFF]. To confirm the address before the document is sent, set [Confirm addresses before sending] to [ON]. NOTE: This option is located on page 2 of [Delivery Options].
CMS-XML Paper becomes jammed because the rollers are dirty.
Do not use excessive force when removing or attaching the retard roller. Doing so may cause the roller to become deformed, resulting in feed errors .
CMS-XML Streaks appear in the images because the scanning glass is dirty.
Scratches on the scanning glass may cause streaks on scanned images, as well as feeding errors .
CMS-XML In order to keep the scanner in good condition, clean the scanning glass and roller regularly.
Scratches on the scanning glass may cause streaks on scanned images, as well as feeding errors . Remove any dirt from the rollers using a cloth that has been soaked in water and thoroughly wrung out.