| Search Results |
 |
Using the wireless controller WL-D85 ZR200, ZR300, ZR400 and ZR600 and ZR700
|
Other Precautions and Notes The wide attachment may obstruct the remote sensor (the range of the wireless controller narrows), or may cause a shadow to appear on the picture when recording with the assist lamp. The wireless controller may not work properly when the remote sensor is subjected to strong light sources or direct sunlight. If the wireless controller does not work, check if the remote sensor is set to [OFF].
|
|
|
List of Canon lens accessories compatible with the VIXIA HV40
|
TL-H43 Tele-converter The image stabilizer is not as effective when the Tele-converter is attached. The minimum focusing distance with the TL-H43 is 3 m (9.8 ft.); 3 cm (1.2 in.) at maximum wide angle. When the Tele-converter is attached, a shadow may appear in the picture when you record with flash or assist lamp.
|
|
|
Explanation of the lens adjustments to aid 3D recording with the XF100/105
|
Using the Focal Length Guide Note: Although the focal length guide is an aid for 3D recording, make sure to check the picture angle visually while recording.
|
|
|
Adjusting the Focus Magnification XF705
|
or setting to switch the camcorder's image to black & white while using the respective assistance function. - The assistance functions will not affect your recordings.
|
|
|
Working with files saved in HEVC format.
|
Preparation for Working with Files Saved in HEVC Format (Display and Saving) To work with files in the above format shot on an EOS-1D X Mark III, it is necessary to enable HEVC codec. Select the images in the main window, and in the [ Help ] menu, select [Activate HEVC codec], and follow the displayed instructions to enable it.
|
|
|
What assistant functions are available for 3D recording? (XF300/XF305)
|
Although the focal length guide is an aid for 3D recording, make sure to check the picture angle visually while recording. You can obtain more accurate results when you perform this procedure at full telephoto. The same picture angle for camcorders cannot be guaranteed.
|
|
 |
Troubleshooting
|
-Make sure the external monitor is compatible with the output signal selected on the camcorder (A 143). Peaking/B&W image/magnification/zebra patterns/waveform monitor do not appear on the viewfinder. -Check that the display of desired assistance function is enabled for the viewfinder ([B&W Image : VF] (A 188), [Magn.: VF+LCD], [Peaking: VF], [Zebra: VF], [WFM: VF] (A 189)).
|
|
|
Adjusting the Focus XF705
|
In order to focus more accurately, you can use the following focus assistance functions: Dual Pixel Focus Guide, an onscreen guide that shows you if the picture is in focus; peaking, which creates a clearer contrast by emphasizing the outlines of the subject; and magnification, which enlarges the image on the screen. You can use peaking and the focus guide or peaking and magnification simultaneously for greater effect.
|
|
|
The image is blurred or out of focus (adjusting focus manually) (XC15)
|
In order to focus more accurately, you can use two focus assistance functions รข peaking, which creates a clearer contrast by emphasizing the outlines of the subject, and magnification, which enlarges the image on the screen. You can use both functions simultaneously for greater effect. IMPORTANT
|
|
|
What do you do when it is difficult to focus manually? (XF200 / XF205)
|
Solution In order to focus more accurately, you can use two focus assistance functions peaking, which creates a clearer contrast by emphasizing the outlines of the subject, and magnification, which enlarges the image on the screen.
|
|
