FiltersClear
CMS-CATEGORY_REF
Content Source
Products
 
 
Pages [Next]
Search Results
CMS-XML How to mount and dismount the EF 2x III Extender
How to mount and dismount the EF 2 x III Extender
CMS-XML EF 2x III Extender : What are the parts and controls - nomenclature?
EF 2 x III Extender : What are the parts and controls - nomenclature?
CMS-XML Specifications for the EF1.4X III and EF2X III Extenders
Please see the dimensions, weights, and other specifications for the EF 1.4 X III and EF 2 X III Extenders .
CMS-XML What lenses are compatible with the EF 1.4x III and EF 2x III extenders?
Please see the following chart for lens compatibility with the EF 1.4 x III and EF 2 x III extenders .
CMS-XML Lenses that can be used with Extender EF1.4X III and EF2X III
Usable lenses: Lens Focal Length & Maximum Aperture EF 1.4 X III EF 2 X III EF 135mm f/2L USM 189mm f/2.8 270mm f/4 EF 180mm f/3.5L Macro USM 252mm f/4.5 360mm f/6.7 EF 200mm f/2.8L USM 280mm f/ 4 400mm f/5.6 EF 200mm f/2.8L II USM 280mm f/4
CMS-XML Lens Specifications with the Extender EF 1.4x II/III or EF 2x II/III
Lens Specifications with the Extender EF 1.4 x II/ III or EF 2 x II/ III
CMS-XML What is the Maximum Aperture with the EF 2x III Extender
When the EF 1.4 x II is attached, the lens maximum aperture will be smaller (darker) by 1 stop. The camera will compensate the exposure automatically.
CMS-XML EF : Checking the battery level status
If the batteries do fail, the EF can still be used manually from 1/ 2 - 1/1000 sec. The Variable Aperture AE control will not operate, but you can manually adjust the aperture ring of the lens. A basic exposure guide to follow for bright sunlight (with distinct shadows) is to make a fraction representing the shutter speed needed at f/16 by putting a "one" over the film's ASA rating.
CMS-XML EF1.4x II Extender : What are the parts and controls - nomenclature?
1. Lens mount index (on top) 2 . Lens mount index (on camera) 3. Lens release lever 4. Electrical contacts 5. Rubber ring
CMS-XML EF : How to unload a roll of film.
This indicates that the film has left the multi-slot take-up spool. Turn the rewind crank one or two more revolutions to completely rewind the top of the film leader back into the cartridge. The pull up the rewind knob to open the camera back and lift out the cartridge.
Pages [Next]