Search Results |
|
Wireless Setup for the imageCLASS MF746Cdw, MF745Cdw, MF743Cdw, MF741Cdw, MF644Cdw, MF642Cdw, MF641Cw and LBP664Cdw - (Contains Video) (Windows)
MF746Cdw, MF745Cdw, MF743Cdw, MF741Cdw, MF644Cdw, MF642Cdw, MF641Cw and LBP664Cdw printers to do wireless printing, scanning, and faxing depending on your specific model. It contains a Canon imageCLASS Wireless Help Video that provides complete instructions for setting up your printer and Windows Computer.
|
|
|
Proof of Purchase Guidance for imageCLASS devices
You may either fax or ... FAX Number : (757) 579-7198 ... This will assist us in validating the receipt in our system.
|
|
|
Cannot Send an International Fax
Step 1 Placing a pause When you specify the destination number in the order "(international access code) - (country code) - (area code) - ( fax number )", enter a pause between numbers. If the number is not recognized correctly even when pauses are entered, Change the pause time.
|
|
|
Specifying a Fax Receive Mode
Specifying the fax settings first 3 Register the fax number and the unit name. 1
|
|
|
Telephone and Fax Do Not Automatically Switch
The sending machine may not support sending a fax identification signal (CNG signal)
|
|
|
Instuctions for clearing error messages
Countermeasures for Each Message Check the following to find out possible causes and solutions for each message. If you cannot send a fax or the memory is full, or you encounter operation problems, a message appears on the display.
|
|
|
Instructions for clearing error codes
A fax could not be sent or received due to its large data size. Basic Operations for Sending Faxes When sending a fax: Reduce the resolution, and scan the original. When receiving a fax: Ask the sender to divide the original into multiple sections or reduce the resolution before sending.
|
|
|
Editing the Address Book from a Computer (Remote UI)
Editing the Address Book from a Computer (Remote UI) Enter the name of the destination. [ Fax Number ] Enter the fax number of the destination.
|
|
|
The Operation Panel and the Display
Adjusting the angle The name or ID of the logged-in user is displayed. Use this button to start copying. Use this button to send a fax from the machine.
|
|
|
User Support Tool
1 Make Sure That the Processing/Data Indicator Is Off Make sure that the Processing/Data indicator on the operation panel of the machine is off. If the indicator is lit up or blinking, wait until the machine finishes all of its operations (copying, printing, sending faxes , etc.).
|
|