Search Results |
|
Error / Warning Messages - LX-D5500 / LX-P5510
Service Call Error Error Message Error Content Service call error XXXX An error that cannot be ... ... If the same error occurs again, ... Print head error ... Time to replace the Bk / C / M / Y print head. ... Open the [ Advanced Settings] tab of the printer driver and then select the [Automatic Speed] in the [Print Speed]. ... If the same error occurs again,update the printer drivers and firmware to the latest versions. If the same error occurs again, take note of the message displayed "XXXX" and contact your place of purchase.
|
|
|
Paper is Jammed - LX-P1300 / LX-D1300
Paper Is Jammed When a paper jam occurs during printing, the printing is interrupted and the Status Monitor will display an error message such as “Paper jam #****” (**** represents numbers). Remove the paper jam according to the following steps:
|
|
|
Replacing the Ink Tank(s) - LX-P1300 / LX-D1300
Replacing the Ink Tank (Indication by Ink lamp) An error message “XXXX ink empty” appears on the status monitor. (Indication on the status monitor)
|
|
|
Edit Characters and Lines - MK3000
No error message will be displayed even if the print data extends beyond the width (top and bottom) of the print media. Refer to the following to set the character size and frame.
|
|
|
Replace the Maintenance Cartridge - LX-D5500 / LX-P5510
Replacing the Maintenance Cartridge Close the maintenance cartridge door. The error message on the Status Monitor disappears, and printing will begin. Put the used maintenance cartridge in the plastic bag.
|
|
|
Replacing an Ink Tank - LX-D5500 / LX-P5510
Do not shake the ink tank. If you do, the error message "xxx ink empty" may appear immediately after replacing the ink tank. If this happens, remove the ink tank and insert it again.
|
|
|
Basic Printing Operations - MK3000
No error message will be displayed even if the print data extends beyond the width (top and bottom) of the print media. It is recommended to refer to the preview to make sure that no characters are missing before printing.
|
|
|
Maintain Ink Quality - LX-P5510
The display shown below pops up as soon as the error message [Exceeding ink refresh timing] appears. Click [Start Ink Refresh]. Click [Help] to check the ink refresh procedure.
|
|
|
Display and Use the Status Monitor - LX-D5500 / LX-P5510
Viewing the Printer Status An error message is displayed with the printer status, printing cannot be completed when an error is issued. Troubleshoot the problem as required.
|
|
|
Use the Printer Driver - LX-D5500 / LX-P5510
Default Settings Paper Size [ ]4 x 5 Label / Gap Paper Type Matte Copies 1 Orientation Portrait 180-degree Rotation Off Print with the selected orientation Off Color Resolution Input resolution 600dpi Half-tone Process Error Diffusion Color Correction Driver Correction Monochrome Print Off Print the gradation smoothly * Off Sharpness * 0 (None) Color Balance * Bk/ C /M/Y All 0 Brightness * Normal Density* 0 Contrast * 0 Cutter Settings** Auto Cutter Off Overlay Settings
|
|