Ask a Question
FiltersClear
CMS-CATEGORY_REF
2499C002 (9)
Content Source
Articles (10)
Products
Projectors (10)
 
 
Search Results
CMS-XML Error Notification Mails WUX7500 / WUX6700 / WUX5800
CMS-XML Turning the Projector Off WUX7500 / WUX6700 / WUX5800
Turn the Projector Off 1 Press the POWER button. 2 When this window is displayed, press the POWER button again.
CMS-XML Menu Remote control/Side control WUX7500 / WUX6700 / WUX5800
Remote control/Side control Specify which operations are available using buttons on the remote control or in the projector’s side controls. Beep You can select whether a beep sounds or not when you operate the projector. The beep will not sound if you mute the projector sound with the MUTE button on the remote control. Key repeat Key repeat enables projector or remote control buttons to be held down instead of pressing them repeatedly. Key lock Lock the projector or remote (wireless) to prevent operation. To Unlock Key Lock Function Turn off the projector and unplug the power plug. Hold down the OK button on the projector and plug in the power cord, as you continue to hold down the OK button. In a moment, a beep will sound, and the controls will be unlocked. When you access this setting from the projector’s side controls, [Main unit] is not available. Similarly, when you access the setting from the remote control, [Remote (wireless)] is not available. IR receiver settings Select the infrared receiver of the projector. Remote control channel Separate channels can be assigned to up to four projectors so that a single remote control can be used with each projector. Selecting the Projector Channel If a wired remote control is used, there is no need to set the remote control channel Selecting a Channel on the Remote Control After changing the projector channel from the menu, always change the remote control channel accordingly.
CMS-XML Connecting to a Wired Network Overview WUX7500 / WUX6700 / WUX5800
■ Network Connection Overview Connecting the projector to a network enables you to control the projector from a computer and receive notification of projector errors via email. Depending on the method of network connection, preparation on the computer side may be necessary.
CMS-XML Projector Web Screen Menu Setting Up IPsec [IPsec] WUX7500 / WUX6700 / WUX5800
• When IPsec is used, the projector must be configured to match the IPsec operating conditions set on other devices that will communicate with the projector. • IPsec operating conditions supported by the projector can be checked on the projector’s web screen. • Setting [Exempt HTTP from IPsec] to [OFF] will prevent access to the projector’s web screen if IPsec is accidentally enabled on other devices used for communication with the projector. To avoid blocking access, you can configure this setting to exclude HTTP communication from IPsec. • [Standby power setting] is set to [Normal] and cannot be changed when IPsec is enabled. • Enabling IPsec will require correct IPsec settings on other devices connected to the projector, such as computers. • IPsec settings cannot be changed when [DHCP] (IPv4) is enabled. • When IPsec is enabled, [DHCP] (IPv4) and [Auto settings] (IPv6) cannot be changed. • When IPsec is enabled, [TCP/IP] (IPv4) and [Manual settings] (IPv6) cannot be changed.
CMS-XML Wireless LAN (Wi-Fi) Legal information WUX7500 / WUX6700 / WUX5800
Frequency band(s): 2,401 MHz – 2,473 MHz Maximum radio-frequency power : 12.7 dBm FCC/IC NOTICE
CMS-XML Maintenance Cleaning the Projector
• Only the , OK and POWER buttons are available while this screen is displayed. (When you press the POWER button, the “Push POWER button again to turn off power .” message appears.) • When this screen has disappeared after being displayed for 10 seconds, all buttons become operable.
CMS-XML Menu System settings WUX7500 / WUX6700 / WUX5800
The guide screen is shown at the following cases. • No input signal is detected. • An invalid button is pressed in [BLANK], [FREEZE], or [D.ZOOM] mode • When positional lock (P143) is set to [On] and buttons locked by this feature are pressed. • When the projector is already on and the POWER button is pressed.
CMS-XML Menu Image Adjustment WUX7500 / WUX6700 / WUX5800
Lamp mode Reducing the lamp brightness reduces power consumption and cooling fan noise. Reset Restore the current image quality settings to the factory defaults.
PDF 2018 CANON PROJECTOR LINE-UP
(3.00 – 5.29m) (7.64 – 14.94m)— ZOOM RATIO Fixed Fixed1.5x Optical Zoom ( Powered ) 1.5x Optical Zoom ( Powered ) 1.7x Optical Zoom ( Powered ) 1.97x Optical Zoom ( Powered ) 1.76x Optical Zoom ( Powered )