| Search Results |
 |
2018 CANON PROJECTOR LINE-UP
|
... Canon projectors can help museums bring out ... ... smoothness and beautifully bright images, however ... ... HDBaseT™ & Wi-Fi ® • MotorizedLensShift ... ... HDBaseT™ & Wi-Fi ® • MotorizedLensShift ... ... HDBaseT™ & Wi-Fi ® • MotorizedLensShift ... ... HDBaseT™ & Wi-Fi ® • MotorizedLensShift ... ... HDBaseT™ & Wi-Fi ® • MotorizedLensShift ... ... HDBaseT™ & Wi-Fi ® • MotorizedLensShift ... ... HDBaseT™ & Wi-Fi ® • MotorizedLensShift ... ... HDBaseT™ & Wi-Fi ® • MotorizedLensShift ... ... Compatible • Advanced Professional Calibration Settings
|
|
 |
Connecting to a Network WUX7000Z / WUX6600Z / WUX5800Z
|
Connection Methods The projector can be connected to a wired network with a LAN cable or to a wireless network via Wi-Fi . Wired Networks
|
|
|
Professional Model Firmware Updates
|
|
Basic Wireless Network Settings [Wireless] WUX7000Z / WUX6600Z / WUX5800Z
|
Basic Wireless Network Settings [ Wireless ] WUX7000Z / WUX6600Z / WUX5800Z
|
|
|
"Learn With Canon" website available for learning events and articles.
|
Also, "Learn with Canon" in-person, with experiences that educate and inspire. Travel to breathtaking locations, learn from talented and passionate instructors, work with professional models, and bring your vision to life with dream gear in your hands.
|
|
|
Controlling the Projector from a Computer WUX7000Z / WUX6600Z / WUX5800Z
|
The factory default IP address is “192.168.254.254” for wired connections and “192.168.253.254” for wireless connections. If DHCP settings are used, ask the network administrator for the projector IP address. It is possible to check the IP address from the projector menu
|
|
|
Projecting from Multiple Projectors at Once (Edge Blending) WUX7000Z / WUX6600Z / WUX5800Z
|
Select [Install settings] > [ Professional settings] > [Edge blending] > [Adjust]. 2 Set [Marker] to [On].
|
|
|
Using PC-Free Multi Projection WUX7000Z / WUX6600Z / WUX5800Z
|
1 On each projector, configure installation and image adjustment settings such as edge blending and keystone correction to blend overlapping areas. 2 Connect the projectors with LAN cables and set [Network (wired/ wireless )] to [On/Off] or [On/On (Pj AP)] 3 Configure some projectors as Secondaries.
|
|
|
Hazard Distance When Equipped with a Replacement Lens (IEC 62471-5) WUX7000Z / WUX6600Z / WUX5800Z
|
• For assistance when disposing of the projector, contact the Canon Customer Support Center. Do not disassemble the projector yourself when disposing of it.
|
|
|
Adjusting Peripheral Focus WUX7000Z / WUX6600Z / WUX5800Z
|
Resetting Adjustment Clears the values set in marginal focus adjustment and returns the lens marginal focus to the standard position. In the [Install settings] menu, select [ Professional settings] > [Marginal focus] > [Reset] to reset the adjustment.
|
|
