| Search Results |
 |
Connecting the DR-6010C using SCSI
|
There are two methods for connecting the DR-6010C scanner to a computer: USB connection, which makes use of a standard USB port on the computer, and SCSI connection, which makes use of a SCSI card installed in an expansion slot of the computer. ... The SCSI ID of the scanner is set to "SCSI ID =2" by default. When using a daisy-chain configuration with other SCSI devcies, set the DIP switches so that there is no duplication of SCSI ID numbers in the system.
|
|
|
Use a recommended SCSI card.
|
When using a SCSI expansion card , select one of the following recommended models: - AVA-2915LP (Adaptec) - AVA-2930LP (Adaptec)
|
|
|
Scanning speeds are lower if your computer's USB interface is not Hi-Speed USB 2.0.
|
- Hard disk: 1 GB or more available space - Interface: USB port present as standard equipment on the computer (Hi-Speed USB 2.0) or SCSI expansion card - Monitor: Resolution of 1024 x 768 (XGA) or better
|
|
|
Check the size, thickness, and weight of the document.
|
The scanner can scan documents ranging in size from business cards and checks to A4 size documents. It can also scan long documents up to 39.2" (1000mm).
|
|
|
Check the SCSI IDs of all SCSI devices connected to the system (6030C)
|
Check the SCSI IDs of all SCSI devices connected to the system and set a unique SCSI ID for the scanner.
|
|
|
Cleaning Guidelines for imageFORMULA Document Scanners
|
scanner? We can help . Watch our video to learn the dos and don'ts.
|
|
|
Connecting the DR-6010C using USB
|
There are two methods for connecting the DR-6010C scanner to a computer: USB connection, which makes use of a standard USB port on the computer, and SCSI connection, which makes use of a SCSI card installed in an expansion slot of the computer. Do not connect a USB cable and SCSI cable at the same time. Follow these steps to install the scanner using the USB connection:
|
|
|
Information requested by CEI for ICS scanning issues
|
have had quite a few recent reports of TWAIN/ISIS errors when scanning with our ICS products. CEI has asked us to perform specific tasks in order to help them determine the issue.
|
|
|
Clean and Sanitize Your Printer and Scanner Equipment
|
Cleaning of Printer and Scanner Products For cleaning and to help sanitize Canon PIXMA, MAXIFY, WG-Series and Finetech Printers as well as CanoScan Scanners, we recommend the following. You will need 70-80% isopropyl or ethyl alcohol and a soft lint-free cloth.
|
|
|
Error "Scanner not found" when using CaptureOnTouch
|
Restore the registry When the scanner is connected to a computer with a camera or a computer that had a USB camera connected to it, the scanner may be unrecognized because Windows has imported a device ID that is incompatible with the WIA registry. Use the "Restoration Tool for Scanner Registry" to restore the registry.
|
|
