| Search Results |
 |
What's New: Canon's most affordable Wireless E-TTL
|
Click the Canon Digital Learning Center (CDLC) link below to access the in-depth article on the EOS System: What's New: Canon's most affordable Wireless E-TTL Note:
|
|
|
Compatible Memory Cards and Wi-Fi Cards
|
|
What kind of software is Canon XF Plugin for Final Cut Pro? (Version 1.4)
|
It may not be possible to transfer or play back clips recorded with video configurations using the 50 Mbps (4:2:2) bit rate with the following combinations of resolution and frame rate: 1280x720, 29.97P; 1280x720, 25.00P; 1280x720, 23.98P. Upgrade to Final Cut Pro 7.0.3 or perform the following procedure.
|
|
|
What is included in firmware version 1.1.1 for the EOS 5D.
|
What has been changed in Version 1.1.1 firmware? Specifically, the four lenses listed in item 2 above have been added.In images taken with these lenses and cameras updated to v1.1.1, the lens aberration correction function can be used.
|
|
|
What cable can I use to connect the camera to a TV? (PowerShot G7 X / PowerShot SX710 HS)
|
Solution Connect the camera to a TV a commercially available HDMI cable (not exceeding 2.5 m, with a Type D terminal on the camera end) or the AV Cable AVC-DC400ST (sold separately). NOTE
|
|
|
What cable can I use to connect the camera to a TV? (PowerShot G1 X Mark II / N100)
|
Solution You can connect the camera to a TV with a commercially available HDMI cable (not exceeding 2.5 m, with a Type D terminal on the camera end), or with the AV Cable AVC-DC400ST (sold separately). NOTE
|
|
|
Canon Maintenance Service
|
Canon Maintenance Service will help ensure your Canon EOS Digital SLR camera and EF lenses maintain optimal condition and performance. Your equipment will be serviced by Canon Factory Trained Technicians, using state-of-the-art technology, to help ensure continued optimal image quality.
|
|
|
Compatible Remote Switch (EOS 6D)
|
Solution Remote Switch and Remote Controller You can connect the Remote Switch RS-80N3, Timer RemoteController TC-80N3 ( sold separately), or any EOS accessoryequipped with an N3-type terminal to the camera for shooting. NOTE
|
|
|
Compatible Remote Switch (EOS 5D Mark III)
|
Solution Remote Switch and Remote Controller You can connect the Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 ( sold separately) or any EOS accessory equipped with an N3-type terminal to the camera and shoot with it. NOTE
|
|
|
Compatible Remote Switch (Movies/Photos) (EOS REBEL T5/EOS 1200D)
|
Remote switch with a 60 cm/2.0 feet cord for pressing the shutter button halfway or completely. It connects to the camera's remote control terminal .
|
|
