You can shoot continuously at a maximum speed of approximately 0.7 images/second while the <shutter button> is pressed fully and held. (When shooting continuously in [Low Light] (
) mode, the maximum speed is approximately 2.7 images/second)
1. Set the <Mode Switch> to
[Shooting] (
) and then press
the <Power> button.
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0077450.gif)
2. Press the <FUNC./SET> (
) button.
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0076817.gif)
3. The following screen appears on the LCD monitor.
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0079153.gif)
Operate the <directional buttons> up or down to select the [Single Shot] (
).
Press the <FUNC./SET> (
) button.
4. The following screen appears on the LCD monitor.
Operate the <directional buttons> up or down to select the [Continuous Shooting] (
).
Press the <FUNC./SET> (
) button.
5. The following screen appears on the LCD monitor.
If the [Continuous Shooting] (
) icon is displayed on the upper-left part of the screen, the setting is completed.
As long as you hold the <shutter button> down, the camera will shoot successive images.
Note:
- Continuous shooting speed increases in [Low Light] (
) mode. (Approx. 2.7 images/sec.)
- To set the shooting mode to [Low Light] ( ) , follow the instructions below.
|
1. Set the <Mode Switch> to [Shooting] (
).
2. Press the <FUNC./SET> (
) button.
3. Operate the <directional buttons> up and down to select [Shooting Mode]. ([Program AE] (
) appears if settings have not been changed before.)
4. Press the <FUNC./SET> (
) button.
5. Operate the <directional buttons> up and down to select [Low Light] (
).
6. Press the <FUNC./SET> (
) button.