Loading a Document on the Platen Glass

1. Lift the document cover (1).
   
   
   
   
2. Place your document on the platen glass (2).
   
   
3. Load the original WITH THE SIDE TO SCAN FACING DOWN and align it with the alignment mark .
   
   
   
   
4. Gently lower the document cover.
   
   
   
   

Important:

• The machine cannot scan the shaded area (A) (0.04 inches / 1 mm from the edges of the Platen Glass).
  
  

Loading Only One Original in the Center of the platen glass

• Scan only one disc in Scan label and print of Disc label
  
• Scan only one printed photo in Photo copy
  
• In Scan,
  
  • - select Auto scan for Doc.type to scan one printed photo, postcard, business card, or disc
  • - select Photo for Doc.type and specify Auto scan for Scan size to scan one original
    
    
• Scan one printed photo, postcard, business card, or disc with a software application on a computer

Load the original WITH THE SIDE TO SCAN FACING DOWN and place it at least 0.4 inches (10 mm) away from the edges of the platen glass.

Loading Two or More Originals on the platen glass

• Scan two or more printed photos in Photo copy
  
• In Scan,
  
  • - select Auto scan for Doc.type to scan two or more printed photos, postcards, or business cards
  • - select Photo for Doc.type and specify Auto multi scan for Scan size to scan two or more originals
    
    
• Scan two or more printed photos, postcards, or business cards with a software application on a computer

Load two or more originals WITH THE SIDE TO SCAN FACING DOWN and place them at least 0.4 inches (10 mm) away from the edges of the platen glass and at least 0.4 inches (10 mm) apart from each other.

(A) 0.4 inches (10 mm)

Note:

• The Skew Correction function automatically compensates for the originals placed at an angle of up to approximately 10 degrees. Slanted photos with a long edge of 7.1 inches (180 mm) or more cannot be corrected.
  
• Non-rectangular or irregular shaped photos (such as cut out photos) may not be scanned properly.