Set Up the Paper Cassette and Load Paper

1. Align the guides (B) on edges of the paper cassette to the protrusion (A) inside the machine.
   
   
   Install the paper cassette with the front end tilted upwards.
   
   
   
   
2. Push the paper cassette down until the hooks (A) on sides of the paper cassette engage the protrusions (B) inside the machine.
   
   
   
   
3. Open the front panel of the paper cassette.
   
   
   
4. Slide the paper guide rail (A), and then pinch and slide the side paper guides (B) to match the size of paper.
   
   
   
5. Fan the paper stack and even the edges.
   
   
   
   
6. Load the paper into the paper cassette with the print side up. Make sure the paper stack sits below the small fin (A) on the side paper guide.
   
   
   
   
7. Adjust the paper guide rail to match the size of paper.
   
   
   
   
8. Close the front panel of the paper cassette.
   
   
   
   To load Legal-size paper, leave the front panel of paper cassette open and adjust the paper guide rail (A) for Legal-size paper.
   
   
   
   
9. Connect the edge of dust cover (A) and the edge of paper cassette (B).
   
   
   
   
10. Slide the output tray extension on the front of the machine, and lift the paper stopper.
    
    
    
    
11. Attach the document feeder tray on the document feeder.
    
    
    
    - The default paper size/type setting is <LTR> and <PLAIN PAPER>. When you load other size and/or type of paper, change the paper size/type setting.