1. Open the paper support and extend the paper support extension. (See <1> in Figure 1 below.)
   
   
2. Open the paper output tray. (See <2> in Figure 1 below.)
   
   
3. Set the paper thickness lever according to the media being used. (See <3> in Figure 1 below.)
   
   Note: For paper thickness lever settings, use the following setings for the media type being used: Right side: Envelopes / T-Shirt transfers. Left side: All other media types.
   
   
   * Figure 1
   
   
   Illustration shows the MP460
   
   

TOP

All media types other than Envelopes.

1. Fan the paper and align the four corners.
   
   
   * Figure 2
   
   
   
   
2. Set paper in the auto sheet feeder with the paper's print side facing up. (See <1> in Figure 3 below.)
   
   
3. Align paper to the right edge of the auto sheet feeder. (See <2> in Figure 3 below.)
   
   
4. Pinch and slide the paper guide to the paper's left side. (See <3> in Figure 3 below.)
   
   
   * Figure 3
   
   
   Illustration shows the MP460
   
   

TOP

Click here to return to instructions for loading all media types other than envelopes.

Loading Envelopes:

1. Check the printing direction.
   
   
2. Set the envelope in the direction of the arrow as indicated in Figure 4 below.
   
   * Figure 4