Receiving Faxes / Printing faxes from memory- MX320
| Article ID: ART130642 | | | Date published: 05/12/2015 | | | Date last updated: 08/17/2015 |
Description
Solution
This section describes the operation to receive a fax with the machine depending on the receive mode. This section also describes the operation to print documents stored in the memory of the machine such as when an error occurred.
Prepare for receiving a fax according to the following procedure.
1. Make sure that the power is turned on.
2. Make sure of the receive mode setting.
3. Load the paper for printing.
4.Specify the paper for printing.
(1) Press the FAX button.
(2) Press the Settings button.
Page size will appear on the screen.
(3) Specify the page size.
You can specify A4, 8.5"x11"(LTR), or Legal (or 8.5"x14").
(4) Press the OK button.
The specified settings will be selected.
5.Return to the fax standby screen.
(1) Press the FAX button.
Receiving a Fax in Each Receive Mode
- If you want to use a single telephone line for faxes and voice calls, you need to connect a telephone or an answering machine to the External Device Jack of this machine.
- The operation for receiving a fax varies depending on the receive mode.
- When Fax priority mode is selected:
When the receive mode is in Fax priority mode, receive a call as follows.
1. A fax or voice call incomes.
2. Receive the fax or voice call.
Fax: The machine will receive it automatically.
Voice call: The machine will ring when a voice call incomes.
Pick up the handset, and press the Stop button to answer the call
- When the machine rings, pick up the handset before pressing the Stop button. If the Stop button is pressed before picking up the handset, the telephone call will be disconnected.
- It takes a little time until the machine rings when the call is a voice call.
- If a telephone is connected to the machine, the telephone will ring when the call incomes regardless of the receive mode.
For Fax priority mode
- When the receive mode is in Fax priority mode, select Fax priority mode in Reception settings under Fax settings and change the following settings.
Ring start time: The time the machine takes to determine whether a call is a fax or a voice call
Telephone ring time: The time the machine rings when the call was a voice call
Default action: Whether or not the machine receives the fax after the specified ring time has elapsed
- When Fax only mode is selected:
When the receive mode is in Fax only mode, the machine will receive a fax automatically if a fax incomes thorough a dedicated telephone line for fax.
- The machine will not ring when it receives faxes.
- If you want to use the machine with a telephone or answering machine, connect it to the machine and change to Fax priority mode or TEL priority mode.
- When TEL priority mode is selected:
When the receive mode is in TEL priority mode, receive a call as follows.
1. A fax or voice call incomes.
When the telephone rings, pick up the handset.
2. Receive the fax or voice call.
Fax: The telephone will ring. If you pick up the handset and hear the fax tone, the machine will switch to the fax automatically and receive the fax.
- If the machine will not switch to the fax, press the Color or Black button to receive the fax.
Voice call: Pick up the handset to answer the call.
When connecting the answering machine:
Voice call: The answering machine responds to the call.
Fax: The machine receives the fax automatically.
- The machine can be set to receive faxes automatically after the telephone rings for a specified length of time. Set Manual/auto switch in Reception settings under Fax settings to ON, and then specify the automatic reception start time.
- If the telephone connecting to the machine is located away from the machine, pick up the handset of the telephone connecting to the machine and dial 25 (the remote reception ID) to receive faxes (remote reception). The remote reception is only available for the touch tone dial. The remote reception can be disabled.
- Set your answering machine to answering mode and adjust it as follows:
- The entire message should be no longer than 15 seconds.
- In the message, tell your callers how to send a fax.
- If you have subscribed to Duplex Ringing service in Hong Kong, the machine will receive faxes automatically even if you set the receiving mode of the machine to TEL priority mode.
- When DRPD is selected:
For Distinctive Ring Pattern Detection (DRPD):
When the receive mode is DRPD, receive a call as follows.
1. A fax or voice call incomes.
The machine judges whether call is voice or fax by the ringing pattern. In the meanwhile the telephone rings.
2. Receive the fax or voice call.
Fax: The machine will receive it automatically when the machine detects the registered fax ring pattern.
Voice call: The telephone continues to ring. Pick up the handset to answer the call.
- If you selected DRPD, you need to select the appropriate ring pattern on the machine.
- When Network switch is selected:
When the receive mode is Network switch, receive a call as follows.
1. A fax or voice call incomes.
The machine judges whether call is voice or fax by the ringing pattern. In the meanwhile the telephone rings.
2. Receive the fax or voice call.
Fax: The machine will receive it automatically when the machine detects the registered fax ring pattern.
Voice call: The telephone continues to ring. Pick up the handset to answer the call.
- The name of this service varies depending on the country or region of purchase. This setting may not be also available depending on the country or region of purchase.
- To use this feature, you need to subscribe to a compatible service provided by your telephone company. Contact your telephone company for details.
Receiving a Fax in the Memory of the Machine (Memory Receiving)
Conditions of Memory Receiving
If the machine receives a fax under one of the following conditions, the machine will not be able to print the received fax and will automatically store it in its memory.
- Ink has run out while receiving a fax.
- Paper has run out while receiving a fax.
- Paper other than A4, Letter, or Legal-sized papers are loaded.
- OFF is selected for Auto Print in User Settings.
- You pressed the Stop button to cancel printing of a fax.
1. Make sure that the plain paper is loaded in the Rear Tray.
2. Display the Memory reference screen.
(1) Press the FAX button, and press the Menu button.
(2) Use the
(-) or (+)
button to select Memory reference, and press the OK button.
3. Print all the received documents in the memory.
(1) Use the
Note
- To print the list of documents in the memory, select Print memory list.
- To print a specified document, select Print specified doc..
- To delete a specified document, select Delete specified doc..
- To delete all documents in the memory at the same time, select Delete all documents.
(2) Press the OK button.
(3) Use the
The machine starts printing documents in the memory one by one.
(4) Use the
To keep the document in the memory, select No.
(5) Press the OK button.
- The deletion confirmation screen will appear each time after one document is printed. Repeat the same procedure until all documents are printed.
