LED Display and Basic Operations
You can use the machine to make copies or perform maintenance operations without a computer.
This section describes the LED display and basic operations on the Operation Panel.
The number 1 appears on the LED normally when turning on the power.
The LED display indicates the machine status as follows.
Machine Status
|
LED Display
|
While copying
|
Number of copies (flashing)
|
While printing, scanning, or performing maintenance operations
|
(flashing in order)
|
When an error occurs
|
E and number appear alternately.
P and number appear alternately.
Service may be required
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account.
|
While the Scanning Unit (Cover) is open
|
(flashing)
|
Number of Copies
When copying starts, the specified number of copies appears on the LED. While copying is in progress, the number on the LED flashes and decreases by one to indicate the remaining number of copies to be made.
Each time you press the [+] button, the number on the LED increases by one. When F appears, the number of copies is set to "20". Press the [+] button again to return to "1".
Maintenance Codes
To perform maintenance of the machine, press the (Maintenance) button repeatedly until the desired code appears on the LED, and then press the Black or Color button.
Error Codes
When an error occurs, E and number appear alternately on the LED to indicate the error code.
e.g. "E, 1, 6"
(flashing in order)
Note
For details on the error codes, refer to "Troubleshooting" in the on-screen manual: Advanced Guide.
If an error code with P appears, an error that requires contacting the service center may have occurred. For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account
For details, refer to "Troubleshooting" in the on-screen manual: Advanced Guide.
|