| Solution | When you need to replace a FINE cartridge, follow the procedure below. IMPORTANT Handling FINE Cartridges - Do not touch the electrical contacts (A) or print head nozzle (B) on a FINE cartridge. The machine may not print properly if you touch them.
- If you remove a FINE cartridge, replace it immediately. Do not leave the machine with the FINE cartridge removed.
- Use a new FINE cartridge for replacement. Installing a used FINE cartridge may cause the nozzles to clog. Furthermore, with such a FINE cartridge, the machine will not be able to inform you when to replace the FINE cartridge properly.
- Once a FINE cartridge has been installed, do not remove it from the machine and leave it out in the open. This will cause the FINE cartridge to dry out, and the machine may not operate properly when it is reinstalled. To maintain optimal printing quality, use a FINE cartridge within six months of first use.
REFERENCE - If a FINE cartridge runs out of ink, you can print with either color or black FINE cartridge, in whichever ink remains, only for a while. However the print quality may be reduced compared to when printing with cartridges. We recommend to use a new FINE cartridge in order to obtain optimum qualities. Even when printing with one ink only, print with leaving the empty FINE cartridge installed. If either of the color FINE cartridge or black FINE cartridge is not installed, an error occurs and the machine cannot print.
- Color ink may be consumed even when printing a black-and-white document or when black-and-white printing is specified.
color ink and black ink are also consumed in the standard cleaning and deep cleaning of the print head, which may be necessary to maintain the performance of the machine. When ink runs out, replace the FINE cartridge immediately with a new one.
1. Make sure that the power is turned on. 2. Open the paper support. 3. Lift the scanning unit / cover, then hold it open with the scanning unit support (C). The FINE cartridge holder moves to the replacement position. CAUTION - Do not hold the FINE cartridge holder to stop or move it forcibly. Do not touch the FINE cartridge holder until it stops completely.
IMPORTANT - The inside of the machine may be stained with ink. Be careful not to stain your hands or clothing when replacing the FINE cartridge. You can easily wipe off the ink from the inside of the machine with tissue paper or the like.
For details on the cleaning, refer to Safety and Important Information. - Do not place any object on the document cover. It will fall into the rear tray when the document cover is opened and cause the machine to malfunction.
- When opening the scanning unit / cover, lift it with the document cover closed.
- Do not touch the metallic parts or other parts inside the machine.
- If the scanning unit / cover is left open for more than 10 minutes, the FINE cartridge holder moves to the far right and the Alarm lamp lights. In this case, close the scanning unit / cover, then open it again.
4. Remove the empty FINE Cartridge. (1) Pinch the tabs and open the ink cartridge locking cover. (2) Remove the FINE cartridge. IMPORTANT - Handle the FINE cartridge carefully to avoid staining of clothing or the surrounding area.
- Discard the empty FINE cartridge according to the local laws and regulations regarding disposal of consumables.
5. Prepare a new FINE cartridge. (1) Take a new FINE cartridge out of its package and remove the protective tape (D) gently. IMPORTANT - If you shake a FINE cartridge, ink may spill out and stain your hands and the surrounding area. Handle a FINE cartridge carefully.
- Be careful not to stain your hands and the surrounding area with ink on the removed protective tape.
- Do not reattach the protective tape once you have removed it. Discard it according to the local laws and regulations regarding disposal of consumables.
- Do not touch the electrical contacts or print head nozzle on a FINE cartridge. The machine may not print properly if you touch them.
6. Install the FINE Cartridge. (1) Put the new FINE cartridge on the FINE cartridge holder. The color FINE cartridge should be installed into the left slot and the black FINE cartridge should be installed into the right slot. (2) Close the ink cartridge locking cover to lock the FINE cartridge into place. Push down the ink cartridge locking cover until it clicks. (3) Confirm that the ink cartridge locking cover is closed correctly. REFERENCE - If the ink cartridge locking cover is not closed correctly, push down the ink cartridge locking cover until it clicks.
(E) Closed correctly (F) Not closed correctly (the cover is tilted)
IMPORTANT - The machine cannot print unless the color FINE cartridge and black FINE cartridge are installed. Be sure to install cartridges.
7. Lift the scanning unit / cover slightly to set the scanning unit support back to its original position, and gently close the scanning unit / cover. CAUTION - When setting the scanning unit support back to its original position, be sure to hold the scanning unit / cover firmly, and be careful not to get your fingers caught.
REFERENCE - If the Alarm lamp lights or flashes orange after the scanning unit / cover is closed, take appropriate action.
- When you start printing after replacing the FINE cartridge, the machine starts cleaning the print head automatically. Do not perform any other operations until the machine completes the cleaning of the print head.
- If the print head is out of alignment, as indicated by misaligned printed ruled lines or similar symptoms, adjust the print head position.
- The machine may make noise during operation.
|
