MAXIFY Remote UI - AirPrint Settings, Print from E-mail Setup, Google Cloud Print Setup and IJ Cloud Printing Center Setup
| Article ID: ART165776 | | | Date published: 06/08/2016 | | | Date last updated: 12/30/2020 |
Description
This article contains images and descriptions of some of the functions found in the Remote UI for MAXIFY printers.
|
After December 31, 2020, Google Cloud Print will no longer be supported.
|
Solution
Note
- This article contains information on the AirPrint settings, Print from E-mail setup, Google Cloud Print setup and IJ Cloud Printing Center setup sections of the Remote UI. Click here for information on the Printer status and Utilities sections. Click here for information on the Security, Records of use and Firmware update sections.
The MAXIFY printer has an HTML interface known as the Remote UI. This interface can be accessed from any device that is connected to the same network as the printer. To access this interface:
-
From the home window, select
Setup -> 
Device settings -> LAN settings -> Confirm LAN settings -> WLAN setting list or LAN setting list. Then from the displayed window, check the IP address.
see an example:
- From your computer, smartphone, or tablet device, open the Web browser, and enter the following URL:
http:// <Printer IP address>
For <Printer IP address>, enter the IP address that you checked in step 1.
When you enter the IP address, you will be prompted to enter a Username and Password.
Username: ADMIN
Password: See "About the Administrator Password."
Note
- The Username display may differ depending on your browser.
AirPrint settings
In this area, you can change the Bonjour service name, the printer location, and the latitude / longitude and altitude for the printer. You can also enable or disable AirPrint.
Make any changes as needed and click OK.
Return to top
Google Cloud Print setup
Note
- If your MAXIFY printer is operating in Access Point mode, this option will not be available.
In this area, you can register your printer with Google Cloud Print or delete the registration information for Google Cloud Print.
To register your printer with Google Cloud Print:
Click Register with Google Cloud Print, then click Yes when asked if you want to register.
You will see "Communicating" in this window.
A new tab in your web browser will open. This will take you to a login prompt for your Google account. Enter in your Google account name and click Next.
Enter your Google account password and click Sign in.
On the Printer confirmation screen, click Finish printer registration.
Click Manage your printers to see the Google Cloud Print printer list.
Your printer will appear in the printer list. If you have registered other printers with Google Cloud Print, these will also appear in the list.
Registration with Google Cloud Print is complete. In the tab of your web browser where you initiated the setup, you will see a confirmation message. Click OK.
To delete the registration information and unregister from Google Cloud Print:
Click Delete from Google Cloud Print, then click Yes when asked if you want to unregister from Google Cloud Print.
After a few moments, the registration information will be deleted from the printer. Click OK on the confirmation message.
Note that if your printer is unable to connect to the internet when you unregister, you will need to access your printer list and delete the entry for your printer from there.
Return to top
Print from E-mail setup
Note
- If your MAXIFY printer is operating in Access Point mode, this option will not be available.
To register the printer for this service:
Click Register printer, then click Yes when asked if you want to register the printer.
A new tab will open in your web browser. Click Next.
Read through the license agreement. At the bottom of the agreement, click Agree to proceed.
Enter in the e-mail address that you will use when you want to e-mail an attachment to the printer. This can be a personal or work e-mail address. Then, click Next.
Note- If you have registered a printer with this service before, you will see a screen telling you that your e-mail address is already registered with this service. Enter your password and click Authenticate.
Enter a name for the printer and click Confirm.
Confirm your information displayed on the next screen and click Register.
The registration will be complete. If this is your first time registering a printer for this service, continue following the directions below.
You will be then asked to enter in some information about yourself, such as your name, language, time zone, etc. Enter in the appropriate information and then click Next.
You will then be asked to enter in the printer’s name. Enter a name for your printer and click Confirm.
You will then see a screen telling you that the owner information will be registered as it has been entered. Confirm that your information is correct and then click Register. If you wish to change any of the information you entered in, click Modify and you will be able to change the information.
You will see message telling you that the temporary registration has been completed and that an e-mail has been sent to you. The message will tell you to go to your e-mail and open the message to find a URL that will allow you to complete the registration. A temporary password is in this message. Write the password down.
Check your e-mail and you will have a message in there related to the registration for the printer. Open the e-mail and click on the URL. You will come to a page asking you to enter in your personal e-mail address and the temporary password you were given from before. Enter that information into the boxes and click Log In.
You will then be asked to create a password. The password will need to have at least one upper case letter, one lower case letter, and one number. Also, it must be at least 8 characters long. If you don’t create a password that meets these requirements, you will receive a warning message and be asked to create another password. Click Register after entering in the password you want to use.
The registration will be completed at that point. You will see your e-mail address that you used for registration (this is the e-mail address that you will send e-mails to the printer from), the address for printing (the printer's e-mail address), and the login URL for this service (https://pr.mp.c-ij.com/po).
On the tab of your web browser where you initiated the registration process, click OK on the confirmation message.
To display the printer's e-mail address:
If you have forgotten the printer's e-mail address, you can display it in the Remote UI. Click Check address for printing. Click OK to return to the Print from E-mail setup menu.
To unregister the printer from this service:
Click Delete registered printer. When prompted, click Yes.
After a few moments, you will see a message confirming that the registration information for the Print from e-mail service has been deleted from the printer. Click OK.
You will then be asked to enter in the printer’s name. Enter a name for your printer and click Confirm.
You will then see a screen telling you that the owner information will be registered as it has been entered. Confirm that your information is correct and then click Register. If you wish to change any of the information you entered in, click Modify and you will be able to change the information.
You will see message telling you that the temporary registration has been completed and that an e-mail has been sent to you. The message will tell you to go to your e-mail and open the message to find a URL that will allow you to complete the registration. A temporary password is in this message. Write the password down.
Check your e-mail and you will have a message in there related to the registration for the printer. Open the e-mail and click on the URL. You will come to a page asking you to enter in your personal e-mail address and the temporary password you were given from before. Enter that information into the boxes and click Log In.
You will then be asked to create a password. The password will need to have at least one upper case letter, one lower case letter, and one number. Also, it must be at least 8 characters long. If you don’t create a password that meets these requirements, you will receive a warning message and be asked to create another password. Click Register after entering in the password you want to use.
The registration will be completed at that point. You will see your e-mail address that you used for registration (this is the e-mail address that you will send e-mails to the printer from), the address for printing (the printer's e-mail address), and the login URL for this service (https://pr.mp.c-ij.com/po).
On the tab of your web browser where you initiated the registration process, click OK on the confirmation message.
To display the printer's e-mail address:
If you have forgotten the printer's e-mail address, you can display it in the Remote UI. Click Check address for printing. Click OK to return to the Print from E-mail setup menu.
To unregister the printer from this service:
Click Delete registered printer. When prompted, click Yes.
After a few moments, you will see a message confirming that the registration information for the Print from e-mail service has been deleted from the printer. Click OK.
Return to top
IJ Cloud Printing Center setup
Note
- If your MAXIFY printer is operating in Access Point mode, this option will not be available.
To register the printer with the IJ Cloud Printing Center:
Click Register with this service. Then, click Yes when you are asked to register the printer with the IJ Cloud Printing Center.
Click OK.
A new tab will open in your web browser. Click Do not send.
A registration e-mail will be sent to you. Type in the e-mail address where you want this registration e-mail to be sent to. Then, click Continue registration.
Click OK.
Go to your e-mail. You will have a message from the Canon Inkjet Cloud Printing Center. Open it and click the link.
The next steps you will take will depend on if you have registered a printer with the Canon Inkjet Cloud Printing Center before, or if it is your first time.
If you have already registered a printer with this service:
After clicking the link, enter your e-mail address and password. Then, click Log in.
Click Yes to select the printer that you just registered with this service.
The printer is now registered with the Canon Inkjet Cloud Printing Center.
If this is the first time you have registered a printer with this service:
When clicking on the link that was e-mailed to you, you will come to a license agreement. Read through the agreement and click Agree to proceed.
Read through the privacy statement. Click Agree to proceed.
You will be prompted to create a password for logging into the Canon Inkjet Cloud Printing Center. Your password must be 8 to 32 characters long. Type your password into the boxes (once for creation, once for verification) and click Next.
You will be asked to create a nickname. Create a nickname and then select your time zone. Click Done. After a few moments, you will receive a notice that the registration for this service has been completed. Click OK.
If you want to unregister the printer from this service:
Click Delete from this service. When you are asked if you want to unregister this printer from the IJ Cloud Printing Center, click Yes.
After a few moments, you will receive a confirmation that this printer has had its registration information for the IJ Cloud Printing Center deleted. Click OK.
