|
EOS R3: Manual Focus
Article ID: ART181992 |
| |
Date published: 05/11/2023 |
| |
Date last updated: 08/30/2023 |
Solution
Manual Focus
If focusing is not possible with autofocus, you can magnify the image and focus manually.
-
Set the lens's focus mode switch to .
- Turn the lens focusing ring to set the approximate focus.
- For lenses without a focus mode switch, set [: Focus mode] to [].
-
Magnify the image.
- Each press of the button changes the magnification ratio, as follows.
-
Move the magnified area.
- Use to move the magnified area into position for focusing.
- To center the magnified area, press straight in.
-
Focus manually.
- While looking at the magnified image, turn the lens focusing ring to focus.
- After achieving focus, press the button to return to the normal view.
Note
- In magnified view, the exposure is locked.
- Even when focusing manually, you can use Touch Shutter to shoot.
Setting MF peaking (Outline Emphasis)
Edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection.
-
Select [: MF peaking settings].
-
Select [Peaking].
-
Set [Level] and [Color].
Note
- Peaking display shown on the screen is not recorded in images.
- MF peaking may be hard to discern when Canon Log is set. If necessary, set [View Assist.] to [On].
|
SIMS Doc Id
1677016414333367397
|