Using HDR Backlight Control Mode on the EOS R50

Article ID: ART182865 | Date published: 05/11/2023 | Date last updated: 05/25/2023
 

Description

Use HDR Backlight Control mode for backlit scenes with both bright and dark areas. Shooting once in this mode captures three consecutive images at different exposures, which are combined to create a single HDR image that retains detail in shadows that might otherwise be lost from backlighting.

Solution

 

HDR Backlight Control Mode

Use [HDR Backlight Control] (HDR Backlight Control) mode for backlit scenes with both bright and dark areas. Shooting once in this mode captures three consecutive images at different exposures, which are combined to create a single HDR image that retains detail in shadows that might otherwise be lost from backlighting.

HDR stands for High Dynamic Range.

Shooting tips

  • Hold the camera steady.

    Keep your elbows close to your body to hold the camera steady (). In this mode, three shots are aligned and merged into a single image. However, if there is significant misalignment in any of the three shots due to camera shake, they may not align properly in the final image.

Caution

  • The image area is smaller than in other shooting modes.
  • RAW image quality cannot be set.
  • Flash photography is not available.
  • Note that the image may not be rendered with a smooth gradation and may look uneven or noisy.
  • HDR Backlight Control may not be effective for excessively backlit scenes or extremely high-contrast scenes.
  • When shooting subjects that are sufficiently bright as they are, for example for normally lit scenes, the image may look unnatural due to the HDR effect.
  • Shooting moving subjects may result in afterimages from the movement, or darkness around the subject.
  • Images may not be aligned correctly if they are patterned (with a lattice or stripes, for example), are generally flat and uniform, or are greatly out of alignment due to camera shake or other issues.
  • It takes some time to record images to the card since they are merged after shooting. [BUSY] appears on the screen as images are processed, and shooting is not possible until processing is finished.

 

SIMS Doc Id

1679067670520477459

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments