|
Digital Photo Professional cannot be run when the resolution of your monitor is set lower than 1024×720, or when color setting are lower than High Color (16bit). In these cases, the below error message will be displayed.
Digital Photo Professional 4.X System Requirements
The system requirements for Digital Photo Professional 4.X are listed in the table below.
| OS (operating system) |
Windows 8.1, Windows 8, Windows 7* |
| Model |
PC with one of the above OS preinstalled (Upgraded machines not supported) |
| CPU |
Core 2 Duo 2.0 GHz or higher (recommended Core i series or later) |
| RAM(memory) |
2.0 GB or more of RAM (4.0 GB or more recommended) |
| Hard disk drive |
Installation: Min. 200 MB of available space
Operation: Min. 256 MB of available space |
| Display |
Resolution: XGA (1024 x 720) or more (1600 x 1200 or more recommended)
Colors: 16 bit color (65536 colors) or more |
May also be installed on a 32-bit version PC, but with restrictions on operation. On 32-bit OSs, (32bit) is displayed on the [About Digital Photo Professional 4] in [Help]. For information on restrictions, see descriptions indicated with in  the instruction manual.
*With Microsoft .NET Framework 4.5 installed.
Changing the Computers Settings
The procedure for changing the screen resolution and color settings of the computer is explained below.
REFERENCE
In this section, the example procedure is shown in Windows 7. Menu items, screens displayed, and procedures may differ depending on the operating system installed on the computer.
1. Click [Start](  ) > [Control Panel].
2.Click [Adjust Screen Resolution] under [Appearance and Personalization].
(If the display setting is set to [Large icons] or [Small icons] select [Display], and then select [Adjust resolution].)
3. Click [Make text and other items larger or smaller].
4. Confirm that the size is set to [Smaller 100% (default)].
If the size is set to [Medium 125%],  choose [Smaller 100% (default)], and then  click [Apply].
5. Click the back button to return to the previous screen.
6.Change the resolution.
Click the menu next to [Resolution] to display the slider.
7. Move the slider up to select a resolution size of 1024×768 or larger.
8. After closing the slider, click [Apply].
9.To implement the new resolution, click [Keep changes] on the below screen.
10. Next, change the color profile. Click [Advanced settings] to open the properties.
11. Click the [Monitor] tab.
12. Set [Colors] to [High Color (16 bit)] or higher.
13. Click [Apply].
This concludes the procedure for changing the resolution and color settings of the computer.
|
