PowerShot ZOOM: Inserting/Removing Cards
| Article ID: ART178086 |
| |
Date published: 11/19/2020 |
| |
Date last updated: 09/12/2023 |
Description
Inserting/Removing Cards
Solution
|
Inserting/Removing Cards
Caution
- Use of memory cards other than microSD / microSDHC / microSDXC cards is not supported.
Note
- The number of shots available varies depending on the card’s free space.
- Reattach the card/terminal cover as shown below if it comes off.
-
Insertion
-
Open the cover.
- After opening the card/terminal cover, flip it over to the right.
-
Insert the card.
- Insert the card with the label facing you. Inserting cards the wrong way may damage the camera.
-
Close the cover.
Removal
-
Open the cover.
- Turn the camera off ().
- After making sure the indicator lamp is off, open the cover and flip it over to the right.
-
Remove the card.
- Press the card in to eject it.
- Pull the card straight out, then close the cover.
Caution
-
A lit indicator lamp indicates that the camera is writing to, reading from, erasing from, or transferring data to the card. Do not open the card/terminal cover at this time. To avoid image data corruption and damage to cards or the camera, never do any of the following while the indicator lamp is lit.
- Removing the card
- Shaking or striking the camera
-
If a card-related error message appears in the viewfinder, remove and reinsert the card. If the error persists, use a different card.
If you can transfer images on the card to a computer, transfer all the images and then format the card with the camera (). The card may then return to normal.
|
SIMS Doc Id
1605799648871767771
