|
How to Update Firmware via USB cable
Article ID: ART116151 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 11/04/2015 |
Solution
Update ProcedureOperating Environment for Printer Update UtilityTarget operating systems Windows - Windows 8.1, Windows 8, Windows 7, Windows 7 SP1, Windows Vista SP1, Windows Vista SP2,Windows XP SP3
Check Whether Update is NecessaryYou can check whether an update is required by printing the nozzle check pattern. Check the software (firmware) version "Ver. X.XXX" that was printed in the nozzle check pattern print results. If the firmware version is earlier than Ver. 2.040, a firmware update is necessary. Update according to "Firmware Version Update Procedure" described below. Note Firmware Version Update ProcedureConnect the computer and the printer by using a USB cable. If a LAN cable or a USB cable for camera connection is connected, disconnect those cables. For models with card slots, remove all the cards if they are inserted in the card slots. Note Important If you are using Windows, double-click (Printer Update.exe) to start the Update utility If you are using Mac OS, double-click (Printer Update) to start the Update utility Check the contents of Step 1 that is displayed in the Printer Update Utility, turn on the printer power, and then click Next. Note Check the contents of Step 2 that is displayed in the Printer Update Utility, turn on the printer power, and click Start. *Depending on the operating system you are using, the displayed operation windows may differ. Printer name: Name of the printer connected to the computer. Current software version: Software version of the connected printer. Update software version: Software version to which the printer is to be updated at this time. Important Note If you are unable to click Start, the update was attempted on a printer that does not require firmware overwriting. Check the Current software version again. If it does not require the update then cancel it. During the update, the error lamp on the printer will flash orange.
When the Step 3 window appears in the Printer Update Utility, check the message contents, and click Quit. This completes the firmware update. When the version update is complete, the printer power turns off automatically. To use the printer, first disconnect the power cable, reconnect it, and then turn on the power again. If you are using the printer with LAN connection, disconnect the USB cable first and then, connect the LAN cable. Important If you will be using the printer in a LAN connection, return the regular printer setting to LAN connection. To return the setting to the LAN connection setting when you are using Windows, you must select "Canon XXX Printer" of port name " CNBJNPxxxxxxxxxx." For setting instructions, refer to the on-screen manual that comes with the printer. Note If the power is turned off during the update, the update will not end normally. If the printer does not operate normally even if you turn off the printer power and then turn it back on again, the update may not have ended normally.
Error Causes and Corrective ActionsIf an error is detected during operation of the Printer Update Utility, an error message is displayed. If an error message is displayed, perform the operation described in the message instructions. The following table lists the causes and corrective actions of the main error messages that may be displayed. Message | Cause | Corrective action |
---|
If you are using Windows or Mac OS | This program does not support the operating system you are using. | An attempt was made to run thePrinter Update Utility on an operating system that the utility does not support. | Run the Printer Update Utility on the supported operating system. | More than one printer is connected. Make sure only one printer is connected with a USB cable, and then restart the utility. | Two or more printers to be updated are connected to the computer. | Connect only one printer. | The printer status is incorrect. Turn on the printer again, and then restart the utility. | The printer was unable to execute the update. | Turn on the printer again. | An error occurred during the printer function update. Since the update failed, the printer cannot be used in its current condition. Turn on the printer again, and then be sure to restart the utility. | The printer power was turned off or the USB cable was disconnected during execution of the update. | Press OK button to terminate thePrinter Update Utility. Turn off the printer power, wait a few seconds, and then turn on the power again. Start the utility again, and operate it. If the printer does not start normally or if the update cannot be executed, repairs are necessary. | If you are using Windows | The printer cannot be found. Check the following items, and then restart the utility: | The printer and the computer are not connected via a USBcable. The printer power is off. The downloaded utility is for a different printer. The printer is operating. The printer driver is not installed.
| Connect the printer and the computer by using a USBcable. Turn on the printer. Download the Printer Update Utility for the printer to be updated, and then start over from the beginning. Wait until the printer operation ends, and then run the utility. Install the printer driver.
| If you are using Mac OS | Mac OS X Classic is running. Stop Mac OS X Classic and restart the utility. | An attempt was made to operate the Printer Update Utility while Classic was running on Mac OS X. | Stop Classic, and operate thePrinter Update Utility from Mac OS X. | The printer cannot be found. Check the following items, and then restart the utility: | The printer and the computer are not connected via a USBcable. The printer power is off. The downloaded utility is for a different printer. The printer is operating.
| Connect the printer and the computer by using a USBcable. Turn on the printer. Download the Printer Update Utility for the printer to be updated, and then start over from the beginning. Wait until the printer operation ends, and then run the utility.
|
|