Manual flash or stroboscopic flash can be set manually with the receiver unit. The setting is independent from the master unit. The mast unit just triggers the receiver unit which fires according to its own independent (manual or stroboscopic flash) settings. This feature can be used in the following situations:
1. As with studio flash units, you can set the receiver units flash output yourself for wireless or manual flash photography
2. For wireless manual flash photography with Wireless Transmitter ST-E2.
|
On a receiver unit with the wireless selector set to <receiver>, press the <MODE> button for at least 2 sec.
M will start blinking. It will continue to blink while the receiver unit's independent setting is in effect
|
While M is blinking, press the <MODE> button. MULTI will then start blinking
|