WFT-E9: Configuring EOS Utility Connection Settings
| Article ID: ART176452 |
| |
Date published: 02/03/2020 |
| |
Date last updated: 09/15/2023 |
Description
Configuring EOS Utility Connection Settings
Solution
|
Configuring EOS Utility Connection Settings
Configuring EOS Utility Connection Settings
Operation on the camera - 1
Operations on the computer
-
Start EOS Utility on the computer.
-
In EOS Utility, click [Pairing over Wi-Fi/LAN].
- If a firewall-related message is displayed, select [Yes].
-
Click [Connect] on the computer.
- Select the camera to connect to, then click [Connect].
- If multiple cameras are displayed, identify the camera to connect to by the MAC address displayed on the camera's monitor.
- The MAC address of the transmitter can also be checked on the [MAC address] screen ().
Operations on the camera - 2
-
Select [OK].
- When the camera detects the computer on which you clicked [Connect] in step 4, the above screen is displayed.
- Select [OK] to proceed to the next screen.
-
Select [OK].
-
Select [OK].
- The [Network settings] screen will reappear.
- The
 lamp on the camera will light in green.
- Settings information is stored in the camera. It is not stored in the transmitter.
The settings for connecting to EOS Utility are now complete.
- There is no need to complete pairing again if you continue using the camera to which the transmitter is attached and the computer together after pairing without changing the settings.
|
