First, recharge the battery.
- For details on the battery, refer to the instructions for the Ni-MH Pack NP-E3.
- For details on how to recharge and discharge the battery, refer to the instructions for the Ni-MH Charger NC-E2.
 |
Connect the power cord.
- Connect the power cord to the charger.
- Connect the power plug to an AC outlet.
- The <POWER> lamp will light.
Detach the protective cover.
- Attach the cover to the battery compartment cap and retain it.
- Whenever the battery is out of the camera, be sure to attach the protective cover to prevent short circuit.
Connect the battery.
- Connect the charging plug to the battery's charging terminal.
- The charging plug can be connected to either terminal A or B.
Battery recharging starts.
- When the battery is connected, recharging starts automatically and the < > lamp lights.
- When the battery is completely recharged, the lamp will start blinking (twice per second).
- A completely exhausted battery takes about 2 hours to fully recharge.
- After recharging the battery, disconnect it and unplug the power cord from the AC outlet.
|
