WB: Setting the White Balance

Setting a Custom White Balance

When the white balance mode is set to match the light source, the camera can reproduce colors more accurately. Set the white balance mode to a natural or artificial light setting according to the circumstances.

	Auto	The camera sets the white balance automatically according to shooting conditions.
	Daylight	Use when shooting outdoors in sunlight on a clear day.
	Cloudy	Use when shooting outdoors and the sunlight is not enough such as under cloudy skies, in shade or at dusk.
	Tungsten	For recording under tungsten and bulbtype 3-wavelength fluorescent lighting.
	Fluorescent	For recording under warm-white, coolwhite or warm-white (3-wavelength) fluorescent lighting.
	Fluorescent H	For recording under daylight fluorescent, or daylight fluorescent-type 3-wavelength fluorescent lighting.
	Flash	When using the flash (cannot be set in (Movie) mode)
	Custom	For setting a custom value with a white sheet of paper, etc., to obtain the optimal white balance for the conditions.

1. Press the <FUNC.> button.

2. Select * (Auto) using the up or down arrows on the omni selector.

* The current setting is displayed.

3. Select the desired setting using the left or right arrows on the omni selector.

• Please see below regarding the custom setting.
• You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image in shot.

4. Press the <FUNC.> button.

5. Shoot the image.

The white balance cannot be adjusted when the photo effect is set to (Sepia) or (B/W).

Setting a Custom White Balance

You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate a subject such as a white piece of paper or cloth, or a photo-quality gray card. This is useful for some situations such as those listed below.

• Shooting close-ups (Macro and Super Macro)
• Shooting subjects of monotone color (such as sky, sea or forest)
• Shooting with a peculiar source of light (such as a mercury-vapor lamp)

1. Press the <FUNC.> button.

2. Select * (Auto) using the up or down arrows on the omni selector.

* The current setting is displayed.

3. Select (Custom) using the left or right arrows on the omni selector.

4. Aim the camera at the white paper or cloth, or gray card and press the <SET> button.

• Aim the camera so that the white paper or cloth, or gray card, completely fills the frame on the LCD monitor screen or the entire viewfinder before pressing the <SET> button. When you press the <SET> button, the camera reads the white balance data.
• You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot.

5. Press the <FUNC.> button.

6. Shoot the image.

• To set and use a custom white balance setting, it is advisable to select the P Shooting mode and set the exposure compensation and flash exposure compensation to zero (+/- 0). The correct white balance may not be obtained when the exposure is incorrect (image is completely black or white).
• It is also advisable to use the LCD monitor to compose the shot and to zoom in to the telephoto end setting.
• Since the white balance data cannot be read in (Stitch Assist) mode, preset the white balance in another Shooting mode first before selecting mode.
• Set the flash on or off when setting a custom white balance. The white balance may not be accurate if the setting conditions and shooting conditions are not the same. If the flash fires when setting a custom white balance with the flash set to or , ensure that you also use the flash when you go to shoot.
• The custom white balance setting is not cancelled even if settings are reset to default settings.