Ask a Question

Attaching or Removing the BU-30 Bluetooth Adapter - MX532

Article ID: ART169509 | Date published: 02/12/2018 | Date last updated: 04/25/2019
 

Description

This article explains how to attach the BU-30 to or remove it from the PIXMA MX532.

 

Solution

To attach the BU-30 Bluetooth Unit to the PIXMA MX532, refer to the information below.
 

Attaching the Bluetooth Unit to the Printer

Removing the Bluetooth Unit from the Printer
 

Attaching the Bluetooth Unit to the Printer

Attach the Bluetooth unit to the USB flash drive port of the printer in accordance with the following procedure.

  1. Make sure that the printer is turned on.

  2. Insert the Bluetooth unit to the USB flash drive port of the printer.

    Detach the cap from the Bluetooth unit. Store the cap in a safe location.



     Note

    • When the Bluetooth unit is properly attached to the printer, the message is displayed on the LCD.
       

Removing the Bluetooth Unit from the Printer

Remove the Bluetooth unit from the USB flash drive port of the printer in accordance with the following procedure.

  1. Remove the Bluetooth unit from the USB flash drive port of the printer.


     Important

    • Make sure that the lamp on the Bluetooth unit is neither lit nor flashing before you remove the Bluetooth unit.



     Important

    • Store the Bluetooth unit with the cap attached.

MX532 Page


 

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments