Basic Network Settings
The basic network settings are required in order to use the machine functions described below.
- Sending data to a file server
- Printing or sending a fax from a computer
- Scanning Documents from a Networked Computer
To perform the basic network settings, follow the procedure below.
note:
It is recommended that the network administrator perform the following procedures.
1. Checking the Network Environment
The network environment for this machine is based on the assumption that:
- Computers are connected to the intranet or the Internet.
- This machine is connected to a router or hub.
The illustration shown below is a sample network configuration for this machine.
2. Connect the LAN Cable
- Connect a Category 5 or greater twisted pair LAN cab e to the 10Base- T/100Base-TX port on the back of the machine. Connect the other end of the cable to a network router or a hub.
- Press the [I] side of the main power switch to turn it ON.
3. Setting and Checking the IP Address
- Set the machine's IP address so that it can communicate with computers on the network.
- Check if the IP address is set correctly.
- Set and check the IP address to meet your system environment.
