16 VA (100 V) - 21 VA (240 V)

Approx. 2 hour*2

Four batteries are supplied with the Battery and Charger Kit CBK4-300. However, only two batteries are used for this camera.

• It takes approximately 2 hours when two batteries are loaded one at each end of the charger and approximately 4 hours 40 minutes with four for the charger to fully recharge them (as determined by testing at Canon facilities). Please do not charge batteries in areas where the temperature is outside the range of 0 to 35^oC (32 to 95^oF).
• Charging time varies according to ambient temperature and to the batteries' initial charge state.
• The battery charger may emit noise while charging. This is not a malfunction.
• You can also use Battery/Charger Kit CBK100 or CBK4-200.

• The Battery Charger CB-5AH can only be used with Canon AA-size NiMH batteries NB-3AH and NB-2AH. (The Battery
• Charger CB-4AH can only be used with Canon AA-size NiMH batteries NB-2AH.) Do not attempt to charge any other types of batteries, and do not attempt to charge NB-3AH or NB-2AH batteries in any other chargers.
• Do not mix batteries with different purchase dates or different charge states. When recharging batteries from the camera, always recharge of them at the same time.
• Do not attempt to recharge fully charged batteries, as doing so may reduce or impair battery performance. Also, do not charge batteries for more than 24 consecutive hours. Two batteries can be charged instead of fourCharge Indicator .
• Four batteries
• Two batteries 92
• Do not recharge batteries in enclosed areas that tend to retain heat.
• Repeatedly recharging batteries before they become fully depleted may cause batteries to lose capacity. Do not recharge the batteries until the LCD monitor displays the "Change the batteries" message.
• Wipe the battery terminals well with a dry cloth in the following situations, as the terminals may be soiled with oil from one's skin or dirt:

- If the battery usage time has considerably diminished.

- If the number of recordable images has considerably diminished.

- When charging the batteries (insert and remove the batteries two or three times before charging)

- When charging completes in a matter of a few minutes (the battery charger indicator remains lit)

• You may not be able to fully charge the batteries due to their specifications right after purchase or after long periods of non-use. If this happens, use the batteries until their charge is depleted before charging them again. After doing this several times, battery performance will be restored.
• Since storing a fully charged battery for long periods of time (about one year) can shorten its lifecycle or affect performance, you are recommended to use the battery in the camera until it is completely discharged and to store it at normal temperature (0 - 30 ?C (32 - 86 ?F) or less).
• If you do not use the battery for long periods of time, charge it fully and discharge it fully in the camera at least once a year before returning it to storage.
• If battery usage time is considerably low despite their terminals' being wiped and the battery charger's indicator remaining lit, it is possible that the batteries have reached the end of their lifespan. Switch to different, unused batteries. If you are purchasing new batteries, look for Canon AA-size NiMH NB4-300 (NB-3AH set of 4) batteries.
• Leaving batteries in the camera or charger may damage it causing battery leakage. Remove batteries from the camera or charger