Reacquiring Subjects Lost after Zooming (Framing Assist) (PowerShot SX520 HS)
| Article ID: ART115963 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/15/2015 |
Description
Reacquiring Subjects Lost after Zooming (Framing Assist) (PowerShot SX520 HS)
Solution
| Reacquiring Subjects Lost after Zooming (Framing Assist) (PowerShot SX520 HS) ID
:
8202134000
_
EN
_
1
|
| Solution |
If you lose track of a subject while zoomed in, you can find it more easily by temporarily zooming out.
1. Press the <Power> button to turn the camera on.
2. Press and hold the <  > button.
The camera zooms out and displays a white frame around the area previously shown (before you pressed the < > button).
3. Aim the camera so that the subject enters the white frame, and then release the < > button.
- The previous magnification is now restored, so that the area outlined in white fills the screen again.
IMPORTANT
- Some shooting information is not displayed while the camera is zoomed out.
- During movie shooting, the white frame is not displayed if you press the < > button. Also note that a changed zoom factor and camera operating sounds are recorded.
NOTE
- If you prefer to shoot at the zoom factor of the screen in step 2, press the shutter button all the way down.
- You can adjust the zoom factor that the camera reverts to when you release the < > button by moving the zoom lever to resize the white frame while you hold the < > button.
- To adjust the area displayed when the < > button is pressed, access MENU - > [
 ] tab -> [Display Area], and choose one of the three options.
- The zoom factor cannot be changed with the < > button after you press the shutter button all the way down in self-timer mode.
|
