Load the original on the platen glass to copy.

1. Make sure that the machine is turned on.

   Confirming that the Power Is On

2. Load paper.

   Loading Paper

3. Load the original on the platen glass.

   Loading Originals

4. Press the Paper button repeatedly to select the page size and media type according to the paper loaded in step 2.

   The Paper lamp indicates the selected page size and media type.

   Note

   • You can select the following page sizes and media types.

     A4 or 8.5" x 11" Plain Paper

     A4 or 8.5" x 11" Photo Paper

     10 x 15 cm or 4" x 6" Photo Paper

   • You can switch the size of paper loaded in the front tray between A4 and 8.5" x 11" (Letter) regardless of the size indicated on the operation panel.

     Switching the Page Size between A4 and Letter

   • When the Fit-to-Page copy function is enabled, you can copy the original in the size automatically enlarged or reduced to fit the selected page size. In this case, the original is copied with borders on the plain paper and without borders on the photo paper. Cancel the Fit-to-Page copy function to copy the original in the same size.

     Reducing or Enlarging a Copy According to the Paper Size

5. Specify the number of copies (max. 20 copies).

   To make 1 to 9 copies or 20 copies

   Display the desired number of copies on the LED. Each time you press the + button, the number on the LED increases by one.

   When the LED displays as follows, the number of copies is set to "20". Press the + button again to return to "1".

   

   To make 10 to 19 copies

   1. Press the + button repeatedly until the LED displays as follows.

      

   2. Load only the desired number of sheets to copy.

   Note

   • Pressing the Stop/Reset button returns the number of copies to 1.

6. Press the Color button for color copying, or the Black button for black & white copying.

   The machine starts copying.

   While copying is in progress, the number on the LED flashes and decreases by one to indicate the remaining number of copies to be made.

   Remove the original on the platen glass after copying is complete.

   To make 10 to 19 copies

   The paper-out error will occur when all of the loaded paper runs out. Press the Stop/Reset button to release the error.

• Do not open the document cover or remove the original from the platen glass until scanning is completed.

• To cancel copying, press the Stop/Reset button.

• To set the print quality to "Fast" (speed priority)

  You can set the print quality to "Fast" (speed priority) only when A4 or Letter-sized plain paper is selected for the page size and media type.

  1. Press and hold down the Color or Black button for 2 or more seconds in step 6.

     The LED flashes once.

  2. Release the button.

     The machine starts copying.

  When the print quality is set to "Fast", print speed is given priority over quality. To give priority to quality, press the Color or Black button for less than 2 seconds to copy in the print quality "Standard".

Page top