| Article ID: ART176206 |
| |
Date published: 01/29/2020 |
| |
Date last updated: 01/29/2020 |
Description
In CAMERA mode, you can have the camera adjust the black balance automatically when ambient temperature changes considerably or if there is a noticeable change in a true black signal.
Solution
Adjusting the Black Balance
- Attach the body cap to the lens mount and set the camera to CAMERA mode.
- If a lens was attached, turn off the camera and remove the lens. Place the body cap back on the lens mount and turn on the camera.
- Select MENU > [
 Camera Setup] > [ABB] > [OK].
- The automatic black balance procedure will start. It may take about 1 minute depending on the frame rate.
- When the confirmation message appears, press SET.
- If the sensor is not completely shielded from light, [Error] will appear on the screen. Repeat the procedure from the beginning.
|
 NOTES
- Adjusting the black balance is necessary in the following cases:
- When using the camera for the very first time or after a long period of not using it.
- After sudden or extreme changes in ambient temperature.
- After changing the sensor mode.
- After activating or deactivating slow & fast motion recording (including switching to another special recording mode).
- After resetting the camera's settings.
- During the adjustment of the black balance, you may notice some irregular displays appear on the screen. This is not a malfunction.
|
