Setup CD-ROM in the computer (Mac OS X v10.6 / Snow Leopard)

Article ID: ART130729 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Solution

<Applicable models>

MP190 series, MP240 series, MP260 series, MP480 series, MP540 series, MP630 series, MP620 series, MP980 series, MX320 series, MX330 series, MX860 series, MP250 series, MP270 series MP490 series, MP550 series, MP560 series, MP640 series, MP990 series

Regarding the above applicable models, the message shown above is displayed when you insert the Setup CD-ROM in the computer.

Click Check Latest Info or Help.

Then, the support page for Mac OS X v10.6 will be displayed. Download the software for Mac OS X v10.6 if needed.

important:

The printer driver is already included in the OS (excluding MP250 series, MP270 series, MP490 series, MP550 series, MP560 series, MP640 series, and MP990 series).

Connect the printer with the computer, and power ON; the driver will be installed.




note:

The software other than printer driver is being prepared. Please wait for our software release information. Thank you for your patience.

And, regarding the printer driver for the MP250 series, MP270 series MP490 series, MP550 series, MP560 series, MP640 series, MP990 series, please wait for our software release information as well. Thank you for your patience.




SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments