Inserting the Battery
Battery: One lithium battery (CR2)
 |
Open the battery cover. While pressing the ridges on the battery cover, lift off the cover.
|
|
Insert the battery.
Insert the battery with the + and - terminal positioned correctly with the release tape (A) behind the battery displayed on the LCD
The battery  indicator is displayed on the LCD panel
|
Close the battery cover.
- Be careful not to trap the release tape when closing the battery cover
If -- -- -- blinks in the LD panel, after you change the battery you will need to reset the date to the correct date and time
|
Removing the battery
- Slowly pull the end of the release tape to remove the battery
Note
After removing the battery to replace it, do not touch any of the switches on the camera. This will allow the date and time to be retained for approximately five seconds
