Ask a Question

Remove foreign objects from ASF MP510

Article ID: ART127048 | Date published: 05/12/2015 | Date last updated: 08/14/2015
 

Description

Remove foreign objects from the printer's Auto Sheet Feeder.

Solution

Check for Obstructions in the Auto Sheet Feeder (ASF)

If paper does not reach the Paper Edge Sensor, the LCD will show [LOAD PAPER].

  1. Power off the printer.

  2. Remove paper from the (ASF).

  3. Look in the ASF area for an obstruction. If there is any foreign material (such as a piece of metal or pen) inside the printer, after turning the printer off and removing the power cord from the outlet, remove the foreign material by hand, or with tweezers.



  4. Open the scanning unit (printer cover) and confirm that there is no foreign material in the printer. If there is any foreign material, remove it.

    Note:
    Avoid touching inner parts.



  5. Close the scanning unit (printer cover).

    Note:
    When closing the scanning unit (printer cover), be careful not to jam your finger.

  6. Power on the printer and confirm that the printer operates normally.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments