Embedding the Date and Time on to an image:

1. Set the <Mode Dial> to a setting other than <Movie> () or <Easy Mode> (), and press the <Power> button.

• 
  

  2. Press the <FUNC./SET> () button.

  
  

  3. A screen like the one below will appear on the monitor.

  

  Select [Date Stamp] () in the [Recording Pixels] section .

  Press the <DISP> () button.

  4. A screen like the one below will appear on the monitor.

  

  Press the camera button as shown above (right and left), select [Date Stamp] and set it to [Date] or [Date & Time].

  Select the <DISP> () button.

  5. Press the <FUNC./SET> () button.

  
  

  6. A screen like the one below will appear on the monitor, so confirm that [Date Stamp] () is set.

  
  

  7. When shooting with this setting, the date will be embedded in the image as shown below.

  

  [Date]

  [Date & Time]

The [Date Stamp] cannot be deleted from the image data once it has been recorded because the date is written in as an image. When selecting [Date Stamp] , [Recording Pixels] is set to 1600 x 1200 pixels and the compression (image quality) to [Fine]. Screens or menu listings may differ depending on the camera model being used. The [Date Stamp] cannot be deleted from the image data once it has been recorded because the date is written in as an image. When selecting [Date Stamp] , [Recording Pixels] is set to 1600 x 1200 pixels and the compression (image quality) to [Fine].Screens or menu listings may differ depending on the camera model being used. The date, its font and color, and the position where it is displayed cannot be changed. Also, dates and times recorded with [Date Stamp] cannot be deleted.