Ask a Question

How to register an AF point on the EOS 10D

Article ID: ART103088 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Description

How to register an AF point on the EOS 10D

Solution

By registering the AF point you often use, you can switch to it instantly. You can register an off center AF point which suits your preferred framing or automatic selection for the shooting moment priority. Any of the seven AF points can be registered. Only one AF point can be registered

On the menu, select [Custom Functions (C.Fn)].
  • Press the <MENU> button.
  • Turn the <> dial to select [Cusom Functions (C.Fn)], then press <SET>.
  • The Custom Function screen will appear.

Select C.Fn-07 [AF point registration].

  • Turn the <> dial to select [AF point registration], then press <SET>.

Register the AF point.

  • Turn the <> dial to select the desired AF point, then press <SET>.
  • 4: is automatic AF point selection.
  • The selected AF point will be registered.
  • Press the <MENU > button to return to the menu.
  • To turn off the LCD monitor, press the <MENU> button again.

SWITCHING TO THE REGISTERED AF POINT

Normally, to switch to the registered AF point, you press the <> button and <> button simultaneously. However, with C.Fn-13-1/2, you can just press the < > button to switch to the registered AF point.

Press the <> button and <> button simultaneously.

  • This is the default method with C.Fn-13-0.

Press only the <> button to switch to the registered AF point. [C.Fn-13-1]

Switch to the registered AF point only while pressing the <> button. [C.Fn-13-2]

  • When the <> button is released, it will return to
  • the original AF point.

If C.Fn-13-1/2 and C.Fn-04-1/3 have been set, you can press only the <> button to switch to the registered AF point and start autofocusing at the same time.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments