| Article ID: ART114878 |
| |
Date published: 05/11/2015 |
| |
Date last updated: 10/30/2015 |
Description
Adjusting the Printhead (iPF6400S/iPF8400S)
Solution
| Adjusting the Printhead (iPF6400S/iPF8400S) ID
:
8201960800
_
EN
_
1
|
| Solution |
If printed documents are affected by the following problems, try adjusting the printhead.
Printing is faint or affected by banding in different colors Execute Nozzle Check in the Control Panel menu to check for printhead nozzle clogging.
Printed vertical lines are warped or colors are out of alignment Execute Head Posi. Adj. in the Control Panel menu to adjust the printhead position.
- Normally, execute Standard.
- When printing on special paper, or if printing is not improved after Standard, try Manual.
NOTE
- In the next case, execute Initial adjustmt.
- If adjusting the printhead position has not been performed such as due to an error during initial setup
- If Rep.P.head Print in the Control Panel menu is set to Off and adjusting the printhead position has not been performed when replacing the printhead
Paper rubs against the printhead, or image edges are blurred Selecting Head Height in the Control Panel menu and changing the printhead height may improve the situation.
|
