Transporting Your Machine

Be sure to unplug the power cord before transporting the machine. If the machine is likely to be subjected to vibration (e.g;, when transporting over long distances), the following precautions should be taken. If you do not follow these precautions, the machine may be damaged or the quality of your printouts may be adversely affected.

1. Disconnect the printer, telephone and/or network cable.
   
   
   
2. Lift the scanning platform.
   
   
   
3. Open the cartridge cover.
   
   
   
4. Remove a toner cartridge from the machine. In order to avoid direct sunlight, place the toner cartridge in the protective bag that it came in when you purchased it.
   
   
   
5. Close the cartridge cover.
   
   
   
6. The machine will rotate to the next cartridge position. Repeat steps 3 to 5 until all the toner cartridges are removed.
   
   
   
7. Open the cartridge cover.
   
   
   
8. Remove the drum cartridge and store it in the protective bag that it came in when you purchased it.
   
   
   
9. Close the cartridge cover and lower the scanning platform.
   
   
   
10. Detach the document feeder tray.
    
    
    
11. Unplug the power cord.

Detach the document feeder tray. Grip the handles on sides of the machine and lift it carefully, as shown in the illustration above.


When carrying the machine, be sure to hold it in the designated places as shown in the illustration. Dropping the machine can cause personal injury.