Ask a Question

How to Disable IPv6 - TS5320

Article ID: ART175515 | Date published: 10/25/2019 | Date last updated: 08/23/2021
 

Description

If your PIXMA TS5320 is connected to your wireless network but does not have an IPv4 address, disabling IPv6 may help resolve this problem.

Solution

To disable IPv6 on your PIXMA TS5320, please follow the steps below.

  1. With the printer powered on, press the OK button.

  2. Use the up or down arrows until Device settings is selected.  Then, press the OK button.

  3. Use the up or down arrows until LAN settings is selected.  Then, press the OK button.

  4. Wi-Fi will be selected.  Press the OK button.

  5. Use the up or down arrows until Advanced is selected.  Then, press the OK button.

  6. Use the up or down arrows until TCP/IP settings is selected.  Then, press the OK button.

  7. Use the up or down arrows until IPv6 is selected.  Then, press the OK button.

  8. Yes will be selected.  Press the OK button.

  9. Enable / disable IPv6 will be selected.  Press the OK button.

  10. Use the up or down arrows until Disable is selected.  Then, press the OK button.

IPv6 will be disabled.

To enable IPv6, follow the steps above, but select Enable and press the OK button.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum








____________________________________________________________________________________________


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments