Ask a Question

Loading envelopes MP130

Article ID: ART161268 | Date published: 06/09/2015 | Date last updated: 08/18/2015
 

Description

Loading envelopes MP130.

Solution

Loading Paper

Envelopes should be loaded correctly into the printer to avoid paper jams and ensure correct operation of the printer.

Loading Envelopes:

  1. Open the Paper Support, then pull out the Paper Support Extension.

  2. Prepare the envelopes for loading.



    IMPORTANT: Press down firmly on the edges of the envelopes to make the folds crisp. Also, press firmly on the area that corresponds to the edges of the back flap.



    IMPORTANT: Remove any curling by holding the edges diagonally and bending them gently.



    (A): Incorrect
    (B): Correct

    IMPORTANT:
    (a) If the edges of the envelope are inflated or curled, place the envelope on a flat surface. With a pen, press down while moving it from the center toward the edges of the envelope.
    (b) Ensure that no curl or puff exceeds 1/8 in. (3 mm).

  3. Place the stack of envelopes (print side up) in the Auto Sheet Feeder (1), and pinch the Paper Guide (A) and adjust it to the left side of the stack (2). Load the envelopes in the Auto Sheet Feeder with the short side down.



    IMPORTANT: Make sure the stack (approx. 5 envelopes) does not exceed the Paper Limit Mark (B).

Unsuitable Envelopes:

  • Envelopes with an embossed or treated surface
  • Envelopes with a double flap or pressure seals

Printer Driver Settings:

  • Media Type :  Envelope
  • Page Size:  Select either DL Env. or #10 Env. according to the envelope size you are using
  • Orientation:  Landscape

    Note: It may be required to change the paper size option to 'Envelope' in File Page Setup menu.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments