Scan a document and then select the output method. This method allows you to easily scan a document by just following the instructions on the screen.

1. Place the document in the scanner.
   
   
   
2. Click [Scan First].
    
   
   
   
3. Set the scan method in the top screen.
    
   

   ?	Specify whether to enable continuous scanning. When scanning multiple documents as one scanned image or splitting up a large document to scan in parts, select [ON] to enable continuous scanning.
   ?	Specify whether to scan the document in full auto mode. When you want to specify arbitrary scanning conditions, select [OFF] and configure the scanner settings. (See "Scanner Settings")

   
   
   
4. Click the Start button.
    
   The document is scanned. While scanning is in progress, the number of pages scanned is displayed in addition to the scanner settings.
   When scanning is finished, the Output settings screen appears.
   
    
   If you configure scanning conditions that consume a large amount of the computer's memory, scanning may stop because of insufficient memory. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions, and then try scanning again.
   
    
   If a document is scanned when [Enable continuous scanning] is set to [ON], the Continuous Scanning screen (see "Operation in Continuous Scanning Screen") appears when the scanning of the document is finished.
    
   If you place the next document and click [Scan], scanning of the document starts.When scanning of all the documents is finished, click [Next step].
   
   
   
5. Configure the settings related to output and then output the scanned images.
    
   

   ?	Configure the settings related to output. (See "Setting the Output Method")
   ?	Click this button to output the scanned images. The button name differs for each output method. For example, it is [Save] when the output method is set to [Save to folder].

   When output is finished, the complete screen appears. Scan First is now finished.
   
    
   
    
   

   ?	Clicking [Return to top] returns to the main screen of Scan First.
   ?	When output methods apart from [Attach to E-mail] or [Print] are specified, you can click [Open storage folder] to open the folder in which the scanned images were saved.