Making Copies - TS8220

Article ID: ART171565 | Date published: 08/28/2018 | Date last updated: 02/25/2019
 

Description

Basic Instructions

 

Solution

Making Copies

This article describes the procedure to copy with Standard copy.

  1. Check that printer is turned on.

  2. Load paper.

  3. Select  Copy on the HOME screen.

  4. Select  Standard copy.

    The Copy standby screen is displayed.

  5. Load original on platen.

  6. Specify settings as necessary.

    • A: The copy layout is displayed.

      Switch the layout from  (single-sided),  (2-on-1),  (two-sided).

    • B: Specify the number of copies.

      Tap  or  to specify the number of copies.

      If you keep touching here, the number scrolls by 10.

      You can also flick the number to specify.

    • C: Display the print setting items.

      For more on the setting items:

    • D: Specify the page size and the media type.

  7. Tap Color for color copying, or Black for black & white copying.

    The printer starts copying.

    Remove the original on the platen after copying is complete.

    Important

    • Do not open the document cover or remove the original from the platen until scanning is completed.

    Note

    • To cancel copying, tap Stop.



 

Adding Copying Job (Reserve copy)

You can add the copying job while printing (Reserve copy).

The screen below is displayed when you can add the copying job.

Load the original on the platen and tap the same button (Color or Black) as the one which you previously tapped.

Important

  • When you load the original on the platen, move the document cover gently.

Note

  • When Print qlty (print quality) is set High, you cannot add the copying job.

  • When you add the copying job, the number of copies or the settings such as the page size or media type cannot be changed.

  • If you tap Stop while reserve copying is in progress, the screen to select the method to cancel copying is displayed. If you select Cancel all reservations, you can cancel copying all scanned data. If you select Cancel the last reservation, you can cancel the last copying job.

  • If you set a document of too many pages to add the copying job, Cannot add more copy jobs. Please wait a while and redo the operation. may appear on the touch screen.Select OK and wait a while, and then try copying again.

  • If Failed to reserve the copy job. Start over from the beginning. appears on the touch screen when scanning, select OK and tap Stop to cancel copying. After that, copy the documents that have not been finished copying.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments