Support Code 1300 Appears - G3200

Article ID: ART171400 | Date published: 08/15/2018 | Date last updated: 08/15/2018
 

Description

Paper jam in the rear tray or output slot

 

Solution

Cause

Paper is jammed in the paper output slot or in the rear tray.
 

What to Do

Remove the jammed paper following the procedure below.

  1. Slowly pull out paper, either from paper output slot or from rear tray, whichever is easier.

    Hold the paper with both hands, and pull it out slowly so as not to tear it.



     

     Note

    • If you cannot pull out the paper, turn the machine back on. The paper may be ejected automatically.
       

    • If paper becomes jammed during printing and you need to turn off the machine to remove it, press the Stop button to stop printing before you turn off the machine.
       

    • If the paper tears and you cannot remove the jammed paper from the paper output slot or the rear tray, remove the paper from inside the machine.

       

  2. Reload paper and press machine's Black or Color button.

    The printer resumes printing. Reprint the page you were printing if it was not printed properly due to the paper jam.

    If you turned off the machine in step 1, the print data that was sent to the machine is erased. Try printing again.


     Note

    • When reloading the paper, make sure you are using suitable paper and loading it correctly.

    • We recommend using paper sizes other than A5 to print documents with photos or graphics. A5 paper may curl and jam as it leaves the machine.

       


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments