Ask a Question

Light flashes orange four times - iP4920

Article ID: ART136065 | Date published: 05/13/2015 | Date last updated: 08/15/2015
 

Description

The Alarm LED (light) flashes four times to alert you that action needs to be taken.

Solution

Alarm LED Flashes Orange

When a printer error occurs, the Alarm LED (light) flashes orange as shown below. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error.

                                                                                                                     

(A) Note the number of flashes

(B) Flashes repeatedly

  • Number of flashes/Cause
    •  Four flashes:  The ink tank is not installed/Ink tank is not installed properly/Ink may have run out.
  • Action to correct the error

      • The ink tank is not installed.

        Install the ink tank.

      • If the lamp on the ink tank is not lit, the ink tank may not be installed properly.

        Install an appropriate ink tank.

      • If the lamp on the ink tank is flashing, ink may have run out.

        Replacing the ink tank is recommended.

    • If printing is in progress and you want to continue printing, press the printer's RESUME/CANCEL button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The printer may be damaged if printing is continued under the ink out condition.

       Replacing an Ink Tank

    • If multiple ink lamps are flashing, refer to Checking the Ink Status and confirm the status of each ink tank.

 

(10) ON button

(11) POWER LED

(12) RESUME/CANCEL button

(13) Alarm LED


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments