Using Extenders (Sold Separately) with the EF 500mm f/4L IS II USM or EF 600mm f/4L IS II USM lens

Article ID: ART174633 | Date published: 05/31/2019 | Date last updated: 05/31/2019
 

Description

Lens specifications when using extender EF1.4x III or EF2x III are as follows.

Solution

Extenders

Lens specifications when using extender EF1.4x III or EF2x III are as follows.
 
  EF500mm f/4L IS II USM ​EF600mm f/4L IS II USM
EF1.4x II/III EF2x II/III EF1.4x II/III EF2x II/III
Focal length (mm) 700 1000 840 1200
Aperture f/5.6 - 45 f/8 - 64 f/5.6 - 45 f/8 - 64
Angle of View Diagonal 3° 30' 2° 30'
Vertical 1° 20' 1° 40' 1° 10'
Horizontal 2° 30' 1° 40'
Maximum magnification (X) 0.21 0.31 0.21 0.30
 
  • Attach the extender to the lens, and then attach the camera. To remove it, reverse the order. Errors may occur if you attach the extender to the camera first.
  • With Extender EF2x II/III attached to the lens, only manual focus is possible. However, with the EOS-1Ds Mark III, EOS-1Ds Mark II, EOS-1Ds, EOS 1D Mark IV, EOS-1D Mark III, EOS-1D Mark II N, EOS-1D Mark II, EOS-!d, EOS-1V/HS camera, autofocusing with the center focusing point is possible.
  • When shooting with EOS A2/A2E/5, use -0.5 step exposure compensation when using extender EF1.4x II, and use -1 step exposure when using extender EF2x II.
  • Extenders cannot be used more than one at a time.
 
  • AF is possible with extender EF1.4x II/III or EF2x II/III.
  • When an extender is attached, the AF speed will become slower to retain proper control.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments