Ask a Question

How to unload a roll of film from the ELPH LT

Article ID: ART105498 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Solution

Removing the Film Cartridge

The film rewinds automatically when it reaches the end. The frame counter counts down during film rewinding. When the film has been fully rewound, the indicator on the LCD panel blinks. Check that the indicator on the LCD panel is blinking before removing the cartridge from the camera.

Check that 0 is blinking.
  • Press the film rewind button () if a is not blinking.
Open the film cartridge compartment cover.

Rotate the film cartridge compartment cover knob to the left.
Remove the film cartridge.
  • The 0 indicator on the LCD panel disappears.
  • The visual exposure indicator on the film cartridge becomes (exposed).

Rewinding a film cartridge in mid-roll

  • Press the film rewind button ( ) .
  • The visual exposure indicator on the film cartridge changes to (exposed).

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments