This article describes how to configure the printer's IP address on the Control Panel.
 

1. Press the Menu button to display MAIN MENU.
    
   
2. Press or to select Interface Setup, and then press the button.
   
3. Press or to select TCP/IP, and then press the button.
   
4. Press or to select IP Setting, and then press the button.
   
5. Press or to select IP Address, and then press the button.
   
6. After pressing or to select the input field, press the OK button to enable numerical input.
   
7. Press or to select the number, and then press the OK button.
    

   	Note
   	Pressing the button increases the number by 1. The maximum value is 255, after which 0 is displayed. Pressing the button decreases the number by 1. The minimum value is 0, after which 255 is displayed. Hold down or to increase or decrease the value continuously.

8. Repeat steps 3–4 to enter the IP address assigned to the printer.
   
9. Press the Online button to bring the printer online.
   If any of the settings are changed, a message for confirmation is displayed. In this case, press the OK button.
    

	Important
	Be sure to complete step 9. This will activate the values you have entered. You can also specify the subnet mask and default gateway on the Control Panel.

	Note
	If an error message is displayed, check the settings and correct any invalid values. To cancel the setup process, hold down the Stop button for a second or more.