How to scan your ID card with a DR-C series scanner.
Article ID: ART171809
|
Date published: 09/12/2018
|
Date last updated: 09/12/2018
Description
When scanning a thick document (such as an ID card), set the document feeding to bypass and the eject selection lever to the straight path position.
Solution
Set the feed selection lever and the eject selection lever.
Set the feed selection lever to the bypass position (upper position). The feed selection indicator will light orange. Set the eject selection lever to the straight path position.
Adjust the document guides to fit the width of the card to be scanned.
Place the card horizontally with the top edge facing upward.
Place the card one at a time.
If you place cards to be fed vertically, they may not be ejected properly, and cards that get jammed may be damaged when you remove them. Take care of the orientation when placing cards.
With the straight path, documents are ejected at the front of the scanner. Do not place anything that will block output near the document eject area. Also, install the scanner on a smooth surface to enable documents to be smoothly ejected
