LC-2 Wireless Controller : How to install the batteries.
| Article ID: ART122842 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/17/2015 |
Description
How to install the batteries.
Solution
|
|
Transmitter - Use two new AA-size alkaline-manganese batteries.
- Slide the battery chamber cover in the direction of the arrow to open it
- Load the batteries so that their terminals face in the direction indicated by the diagram inside battery chamber
- Once the batteries are loaded, slide the battery chamber cover back
|
|
|
|
Receiver - Use one of the batteries listed below or an equivalent of another brand
- Slide the battery chamber cover in the direction of the arrow to open it
- Load the battery so that its terminals face in the directions indicated by the diagram inside the battery chamber
- Slide the battery chamber cover back
|
- Incorrect loading may cause batteries to explode
- Remove the batteries if you do not expect to use the transmitter or the receiver for three weeks or longer
- Be sure to turn the main switches of the transmitter and the receiver OFF when they are not in use
- When the batteries of he transmitter wear out, replace at the same time with new ones of the same brand.
